ANS CO2 Regulator w/ Soleniod
ANS CO2 Regulator with solenoid is a 3 in 1 regulator
1. Creates a constant output pressure of 50-60PSI.
2. A fine tune adjuster that allow user to adjust amount of CO2 release accurately and precisely.
3. Integrated solenoid control!
Total Length: 16cm X 11cm X 14cmWhat is the use of solenoid?Plants need CO2 when light is on and CO2 injection is unnecessary when light is off. Solenoid is use to turn on and off CO2 by simply switching on and off the electrical supply.Electricity ON = CO2 injectionElectricity OFF = CO2 supply cut off!
Some will ask if they use regulator without the solenoid as they can manually turn the fine tune adjuster off at night and turn it on daily! However, from a season hobbyist, most will tell you this daily ritual can be very tiring. It will be easier to control the CO2 by just a flip of a switch. Furthermore, you can also connect ANS CO2 Regulator with solenoid to common electronic 24hr timer. With this you can leave the system running for months without you touching it.
Related Article : A Complete Guide to Setup a CO2 system
Review and collect 3 points.
Write Your Own Review
- Articles & Videos
If you ask any of the aqua hobbyists, they will tell you one of the most important factor for a successful planted aquarium, is the injection of CO2. In planted aquarium, CO2 is often the limiting factor. With higher CO2 level, aquarium plants flourish and grow. Without sufficient CO2 level, plants are unable to utilize th...